|
|
|
This is the Team Associated RC10B3 Team Buggy.
This kit replaces and is based off of the RC10B2 worlds buggy.
FEATURES: Molded black composite chassis
Stealth gearbox with 2.4:1 ratio
MIP CVDs
Black molded composite front and rear suspension arms
Black composite front and rear shock towers (struts)
Black molded composite battery holding strap
Yellow 1-piece 2.125" front and 2.175" rear wheels
Adjustable battery placement (moves battery front and back)
Bellcrank steering system with built-in servo saver
New black nylon ball cups with more material
Gold anodized shocks
0.71" size front shock body with 0.71 size shaft
1.32" size rear shock body with 1.02 size shaft
4-wheel independent suspension
Ball differential
Black aluminum nose plate with angled kick-up
Pro-line "Step-Pin" rear tires
Pro-line "Edge" rib front tires
Chassis with raised sides for increased roll clearance
Adjustable turnbuckles
Battery foam cushion pads
Adjustable camber front and rear
Adjustable fron toe (in and out)
Adjustable wheelbase
Ball bearings
Bumper
INCLUDES: Chassis, wheels, tires, turnbuckles, shocks, oil, 2.4:1 Stealth
transmission, clear body, ball bearings, black colored parts,
wing, MIP CVDs, composite shock towers (struts), antenna tube,
hex wrenches, decals, instructions, parts list, and 81 tooth
48 pitch spur
SPECS: Length: 15.4" Width: 9.8"
Wheelbase: 11" Height: 5"
Front castor blocks: 30 deg Rear toe:6 degrees (3 per mount)
Transmission ratio: 2.4:1
Front wheel: 2.125"
Rear wheel: 2.175"
48 pitch 81 tooth spur gear
48 pitch 23 tooth pinion gear
REQUIRES: 6 flat or 7 hump pack battery, charger, 2-channel radio w/1 or 2
servos, mechanical or electronic speed control, motor and 48 pitch
pinion (# teeth depends on motor).
COMMENTS: Bearings/bushings:
Two ASCC4606 6906 3/8x3/16 (four needed, front wheels)
Two ASCC4848 7359 3/8x1/4 (four needed, rear hub carriers)
One ASCC4606 6906 3/8x3/16 (two needed, transmission-top)
One ASCC4603 6903 3/8x5/8 (two needed, transmission bottom-
outdrives)
One ASCC4656 6596 3/16x5/16 (one needed, bronze bushing-slipper
clutch)
One ASCC4689 6589 5/32x5/16 (two needed, ball diff)
Initial pinion gear selections
Motor 48 Pitch pinion
stock 24 teeth
14 turn 22 teeth
13 turn 21 teeth
12 turn 20 teeth
11 turn 19 teeth
10 turn 18 teeth
DIFFERENCES:
**TEAM** **SPORT**
Teflon coated shocks Gold anodized shocks
Full ball bearings Bushings
1-piece wheels 3-piece wheels
MIP CVDs Dogbones
